English 
Direct drive sand mill series - easy to clean, zero failure, high efficiency
Grinding structure: rod pin type
Material: Ceramic
Introduction:
Adopt direct drive structure, more optimized and simple design; solve the problem of industries where the sand mill is not easy to clean after use and has a high failure rate Pain point. The special and effective structural design improves the grinding efficiency and reduces the operating failure rate to almost zero. It is equipped with a permanent magnet synchronous motor, which has the characteristics of strong overload capacity, high power factor, high precision, and low noise decibels.
Features:
1. Adopting a direct drive structure, the design is more optimized and concise
2. Solve the industry pain points of sand mills that are difficult to clean after use and have high failure rates
3. The special and effective structural design improves the grinding efficiency and reduces the operation failure rate to almost is zero
4. Equipped with a permanent magnet synchronous motor, which has the characteristics of strong overload capacity, high power factor, high precision, and low noise decibels.
5. Equipped with dual carbon intelligent monitoring system and intelligent large screen for full monitoring.
6. Rod-needle disperser, with high grinding efficiency and narrow particle size distribution
7. Adopt self-developed high-performance double-end mechanical seal, which is safe, reliable and leak-free
8. The inlet and outlet pipes adopt a double-layer cooling structure, with the inner layer passing through the material and the outer layer Layer-through cold water cooling, large cooling area, good cooling effect, jacket cooling, mechanical seal cooling;
9. The pressure sensor can adjust the pressure in the cavity according to different materials. When the pressure is too high, it can automatically alarm and stop, making grinding safer and more reliable.
10. Temperature sensor. The temperature can be set by yourself. If the temperature is too high, it will automatically alarm and shut down.
Technical parameters:
| Model | Direct drive 1000L |
| Dimensions (length*width*height) | 5700*1900*1900 |
| Host power (kw) | 690 |
| Grinding chamber volume (L) actual/effective | 2070/1000 |
| Grinding media size (mm) | 0.2-2 |
| Grinding media filling amount (kg) | 2800-3150 |
| Normal operating energy consumption (kw/h) | 500-550 |
| Speed range (rpm) (adjustable) | 0-300 |
| Line speed (m/s) (adjustable) | 0-16.5 |
| Equipment weight (T) | 15 |
Application fields:
Magnetic materials, carbon nanotubes, phosphorus-coated lithium iron and other battery materials
Direct drive sand mill series - easy to clean, zero failure, high efficiency
Grinding structure: rod pin type
Material: Ceramic
Introduction:
Adopt direct drive structure, more optimized and simple design; solve the problem of industries where the sand mill is not easy to clean after use and has a high failure rate Pain point. The special and effective structural design improves the grinding efficiency and reduces the operating failure rate to almost zero. It is equipped with a permanent magnet synchronous motor, which has the characteristics of strong overload capacity, high power factor, high precision, and low noise decibels.
Features:
1. Adopting a direct drive structure, the design is more optimized and concise
2. Solve the industry pain points of sand mills that are difficult to clean after use and have high failure rates
3. The special and effective structural design improves the grinding efficiency and reduces the operation failure rate to almost is zero
4. Equipped with a permanent magnet synchronous motor, which has the characteristics of strong overload capacity, high power factor, high precision, and low noise decibels.
5. Equipped with dual carbon intelligent monitoring system and intelligent large screen for full monitoring.
6. Rod-needle disperser, with high grinding efficiency and narrow particle size distribution
7. Adopt self-developed high-performance double-end mechanical seal, which is safe, reliable and leak-free
8. The inlet and outlet pipes adopt a double-layer cooling structure, with the inner layer passing through the material and the outer layer Layer-through cold water cooling, large cooling area, good cooling effect, jacket cooling, mechanical seal cooling;
9. The pressure sensor can adjust the pressure in the cavity according to different materials. When the pressure is too high, it can automatically alarm and stop, making grinding safer and more reliable.
10. Temperature sensor. The temperature can be set by yourself. If the temperature is too high, it will automatically alarm and shut down.
Technical parameters:
| Model | Direct drive 1000L |
| Dimensions (length*width*height) | 5700*1900*1900 |
| Host power (kw) | 690 |
| Grinding chamber volume (L) actual/effective | 2070/1000 |
| Grinding media size (mm) | 0.2-2 |
| Grinding media filling amount (kg) | 2800-3150 |
| Normal operating energy consumption (kw/h) | 500-550 |
| Speed range (rpm) (adjustable) | 0-300 |
| Line speed (m/s) (adjustable) | 0-16.5 |
| Equipment weight (T) | 15 |
Application fields:
Magnetic materials, carbon nanotubes, phosphorus-coated lithium iron and other battery materials
Yifu Machinery 
+86-0769-85626082
541476175@qq.com
No. 88 Lianyan Road, Yanwu Village, Dalingshan Town, Dongguan City
